Revenue & metrics

Active View viewability in AdSense: definition, measurement and the effect of placement

Last updated Published By the editorial team6 min5 sources

Key takeaways

  • Active View Viewable is the percentage of impressions that were viewable out of all measurable impressions.
  • Active View Measurable is the percentage of impressions that Active View was able to measure, out of all impressions.
  • Google describes a viewable display impression as one where at least 50% of the ad is displayed on screen for at least one second.
  • The Active View metrics only include regular AdSense for Content and AdSense for Video ad units, not link units or dynamic allocation in Google Ad Manager.
  • With Active View CPM bidding, advertisers only pay for impressions measured as viewable, which links viewability directly to what some bids are worth.
People looking at their smartphones at a railway station
Image: Smartphone use at railway station,Rawpixel.com,CC0,via Wikimedia Commons.

Active View is Google’s viewability measurement. “Active View Viewable” is the percentage of measurable impressions that were actually viewable, meaning at least 50% of the ad was on screen for at least one second. “Active View Measurable” is the share of all impressions Active View could measure. Viewability matters for revenue because Active View CPM advertisers only pay for viewable impressions.

How does Google define Active View viewable?

The AdSense glossary entry Active View Viewable defines it as “the percentage of impressions that were viewable out of all measurable impressions.” Its companion, Active View Measurable, is “the percentage of impressions that were measurable with Active View, out of the total number of impressions.”

The viewability threshold itself appears on the Active View CPM page: an impression is viewable “when at least 50% of the ad is displayed on-screen for at least one second.”

This follows the industry standard published by the Media Rating Council. The MRC Viewable Ad Impression Measurement Guidelines (version 2.0, August 18, 2015) set these rules for desktop:

Ad type Pixel requirement Time requirement
Display ad At least 50% of pixels on an in-focus browser tab, in the viewable space At least one continuous second, after the ad renders
Large display ad (242,500 pixels or more, the size of a 970x250) At least 30% of pixels At least one continuous second
Video ad At least 50% of the ad’s pixels At least two continuous seconds of the ad played

Google’s AdSense pages state the 50% and one-second rule; they do not restate the MRC’s large-ad and video exceptions, so treat those as the industry reference rather than a statement about AdSense measurement.

How are the Active View percentages calculated?

Active View Measurable = Measurable impressions / Total impressions
Active View Viewable   = Viewable impressions / Measurable impressions

Google’s own example: if your ads had 100 measurable impressions and 10 of them were measured as viewable, your Active View Viewability is 10%.

A fuller hypothetical illustration (round numbers, not benchmarks):

Count Value
Impressions 10,000
Measurable impressions 9,000
Viewable impressions 5,400
Active View Measurable 9,000 / 10,000 = 90%
Active View Viewable 5,400 / 9,000 = 60%
Viewable share of all impressions 5,400 / 10,000 = 54%

Note the last line. It is not an AdSense metric, but it is the honest answer to “what share of my ads were seen”, because the viewable percentage ignores impressions that could not be measured.

What does an impression mean here?

Google’s help page on Impressions explains that AdSense counts an impression when at least one ad “has begun to download to the user’s device”, and that “the complementary ActiveView viewable metric is used to determine if users actually viewed the impressions.” So an impression can be counted for an ad nobody ever saw: it loaded, but the user never scrolled to it.

Which impressions are included?

From the two glossary entries:

  • Included: regular AdSense for Content and AdSense for Video ad units.
  • Excluded: link units, and data from dynamic allocation in Google Ad Manager.

Why might impressions not be measurable?

Google lists these cases on the Active View Measurable page:

  • The publisher ad tag is placed within a cross-domain iframe, so viewability may not be measurable.
  • A backup image displays or a default ad serves: the impression does not count as measurable.

If your measurable rate is unusually low, check how the ad code is embedded. Placing AdSense code inside your own iframe is also a policy question; see where AdSense code cannot go.

Why does viewability affect earnings?

Because some advertisers buy only viewable impressions. The Active View CPM page says that, with this bidding, “advertisers bid on 1000 viewable impressions and only pay for impressions that are measured as viewable.” A non-viewable impression earns nothing from such a bid. The other bid types are explained in CPC vs CPM bids.

The logic also works in reverse: an ad that is never seen is unlikely to be clicked, so it rarely earns from CPC bids either. Low-viewability slots therefore tend to drag down impression RPM. Google does not publish a figure linking viewability to revenue, so judge the effect with your own data.

How does placement change viewability?

The definition explains most of it: an ad must be at least half visible for a full second. These consequences follow directly; they are not separate Google rules.

Placement pattern Effect on viewability Why
Ad at the very bottom of long pages Lower Many visitors leave before scrolling there
Ad loaded far below the fold on page load Lower It is counted as an impression but may never enter the viewport
Ad within the main reading flow Higher Readers scroll past it at reading speed, often for more than a second
Ad in a sidebar hidden on mobile layouts Not counted on mobile if not requested Hidden slots should not request ads at all
Sticky or anchored formats Usually higher They stay on screen while the user scrolls
Ads in a background tab Not viewable The MRC rule requires an in-focus browser tab

Lazy loading (requesting an ad only when its slot approaches the viewport) also reduces the number of impressions that load but are never seen. Google’s guidance on what is allowed is covered in lazy loading AdSense. For anchor and side rail formats, see anchor, vignette and side rail ads.

How do I check viewability in reports?

  1. Open Reports in AdSense.
  2. Add Active View metrics (viewable, measurable, and average viewable time if you want time in view) to the report.
  3. Break the report down by ad unit to compare placements, and by platform to compare desktop with mobile.
  4. Sort by Active View Viewable to find the weakest slots, then compare their impression RPM.

The AdSense Management API exposes the same data as ACTIVE_VIEW_MEASURABILITY, ACTIVE_VIEW_VIEWABILITY and ACTIVE_VIEW_TIME (mean time an ad was displayed on screen), according to its metric reference. The API describes the first two as ratios of “requests”; the help center describes them in terms of impressions.

A worked example: weighing a low-viewability slot

All figures are hypothetical, round numbers for illustration.

Ad unit Impressions Active View Viewable Impression RPM Earnings
In-content, after paragraph 2 40,000 70% $2.00 $80
Sidebar, top 40,000 55% $1.50 $60
Footer 40,000 20% $0.50 $20

The footer unit has the lowest viewability and the lowest impression RPM, which fits the mechanism: a slot that is rarely seen rarely wins value from viewable-impression or click bids. Removing it would raise the site’s average viewability and impression RPM, but it would also remove $20 of earnings. Whether that is the right call depends on what the slot costs you in page weight, layout stability and reader experience, and the honest way to find out is an experiment, not the averages.

How do I improve viewability without breaking policy?

  1. Remove or move slots that are rarely seen, then check that page RPM, not just viewability, improves. See page RPM vs impression RPM.
  2. Test changes with an experiment instead of before/after comparisons: AdSense experiments.
  3. Reserve space for ad slots so layout shifts do not push ads out of view or under the user’s finger. See preventing CLS from ads.
  4. Do not force visibility. Placing ads where they cover content or look like navigation, or making users wait on an ad, can break ad placement policies.

Common mistakes

  • Reading viewability as a share of all impressions. It is a share of measurable impressions.
  • Chasing 100%. A placement can be highly viewable and still earn little if it annoys readers or attracts accidental clicks.
  • Comparing viewability across sites. Layout, content length and audience behaviour differ.
  • Ignoring measurability. A high viewable percentage on a low measurable base can mislead.

Frequently asked questions

What counts as a viewable ad impression in AdSense?

Google's Active View CPM help page describes a viewable impression as one where at least 50% of the ad is displayed on screen for at least one second. This matches the Media Rating Council desktop display guideline (50% of pixels in view for at least one continuous second). The MRC sets a two-second continuous play requirement for video ads.

Why is my Active View Viewable percentage based on measurable impressions?

Because viewability can only be confirmed when it can be measured. Google's help page explains that all viewable ads are measurable, so the viewable percentage divides viewable impressions by measurable impressions, not by all impressions. A separate metric, Active View Measurable, shows what share of all impressions could be measured.

Why are some impressions not measurable?

Google lists several reasons: the ad tag may sit inside a cross-domain iframe, which can prevent measurement, and impressions where a backup image or default ad serves do not count as measurable. Link units and dynamic allocation through Google Ad Manager are also excluded from these metrics.

Does higher viewability increase AdSense earnings?

It can. Advertisers using Active View CPM bidding only pay for impressions measured as viewable, so a viewable impression can earn from those bids while a non-viewable one cannot. Google does not publish a figure linking viewability to revenue, so measure the effect on your own page RPM rather than assuming a fixed gain.

Sources

  1. Active View Viewable · Google AdSense Help
  2. Active View Measurable · Google AdSense Help
  3. Active View CPM · Google AdSense Help
  4. Impressions · Google AdSense Help
  5. MRC Viewable Ad Impression Measurement Guidelines (Version 2.0, August 18, 2015) · Media Rating Council